Central Vacuum Cleaner Systems Multistage, Hoppers, Pre-Seperators & Interceptor Drums
- Explosion-Proof or Standard versions available
- Available with Manual Filter Shaker system (MFS) or automatic filtation cleaning options (AFS) (APS)
- Stainless Steel construction available
Tiger-Vac offers practical and cost-effective products as well as complete central vacuum cleaner system solutions for a wide range of applications and industries. We can assist you in the design of a central vacuum cleaner system suited to your requirements and meeting the most stringent safety regulations and quality standards.
Filtration Recovery Units
CDPU-5/7/10 EX
Electrically Operated
Electrically Operated
Power: 5-10 HP
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
IECEx Certified
0081 
II 2 G/D Ex d IIB T4 Ex tD A21
IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof by a recognized testing laboratory.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Continuous duty 3-phase explosion proof motor
- Power Unit can be attached to a Filtration System (FRS)
- Can be used as a mobile or central unit
- All stainless steel SAE construction
- Equipped with 4 wheels for easy maneuverability. Can also be equipped with slots for fork lift capability
- Group E Motor (Metal Dust) and Switch available
- Other motor performances available
FRS-40/160L EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- For 5 to 10HP motor performance
- Stainless steel SAE 304 construction
- Compatible with CD-10 EX Series
- Automatic Purge (APS) filter cleaning system with 4 cartridges
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 40 gallons (160 litres)
FRS-63L EX EXTENDED
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Stainless steel SAE 304 construction
- Compatible with CD-5/7 EX Series
- Extended Series
- Available with Manual (MRP) Reverse Purge Filter Cleaning System with 1 cartridge & skirt. Total Cartridge and Skirt surface area is: 27.4 ft² (25 500 cm²)
- Available with Automatic (APS) Purge Filter Cleaning System with 1 cartridge & skirt. Total Cartridge and Skirt surface area is: 65.5 ft² ( 60 810 cm²)
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 15 gallons (63 litres)
FRS-10/40L EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- For 2.2 kW to 5 kW motor performance
- Stainless steel SAE 304 construction
- Compatible with CD-5 EX Series
- Manual Reverse Purge (MRP)
- Also Available with Automatic Purge (APS) or Manual Filter Shaker (MFS) systems
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 10 gallons (40 litres)
FRS-15/63L EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- For 2.2 kW to 5 kW motor performance
- Stainless steel AISI 304 construction
- AISI 316 Electropolished available
- Compatible with CD-5 EX Series
- Available with Manual (MRP) or Automatic (ARP) Reverse Purge Filter Cleaning System with 1 cartridge
- Also available with Manual Filter Shaker (MFS) System
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 15 gallons (63 litres)
Hoppers
HOPPER FRS-570 SS (APS)
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Stainless steel SAE 304 construction
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Automatic Purge (APS) filter cleaning system with 4 cartridges
- Available with a recovery drum (capacity of 40 gallons (160 liters)), Drum on a pallet or Super Bulk Bag on a pallet
- Also available non-explosion proof versions
Transfer Lid Assembly
TRANSFER LID ASSEMBLY
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof / dust ignition proof
- Stainless steel
- Designed for Open Top Drum Filling. Can also be used for nuclear applications
- For liquid recovery
- Can be mounted on a standard 55 gallon drum
- Must be attached to an explosion proof / dust ignition proof power source
Primary Cyclonic Transfer Drum
PRIMARY CYCLONIC TRANSFER DRUM ADAPATOR
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof / dust ignition proof
- Stainless steel
- Designed for bulk and granular recovery
- For dry recovery only
- Can be mounted on a standard 55 gallon drum
- Must be attached to an explosion proof / dust ignition proof power source
Interceptor Units
INT-55 TC EX (MRAC)
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery of flammable liquids
- For wet & dry recovery
- All stainless steel SAE 304
- Contains a Middle Ring with Activated Carbon for the adsorption of toxic/nuisance fumes & vapors
- Recovery capacity of 45 gallons (171 liters)
- Drain valve for easy disposal of recovered materials
- Based on a 4-wheel tilting cart (TC) to allow for easy emptying of recovered materials
- Includes a static dissipating suction hose assembly and connection hose assembly
AC-25 (4W) EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the adsorption of toxic/nuisance vapors, fumes and odors
- For wet & dry recovery
- All stainless steel SAE 304
- Drum system contains 55 lbs (25 kilos) of activated carbon pellets
- Based on an SD* 4-wheel dolly for easy maneuverability. Cart has SD* conductive wheels
- Includes a static dissipating, fuel resistant, connection hose
IT-55 (4W) EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- All stainless steel SAE 304
- Recovery capacity of 5 gallon (19 liters) of dust into 25 gallons (95 liters) of neutralizing liquid
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Includes a static dissipating connection hose
INT-55 (4W) EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery of flammable liquids
- For wet & dry recovery
- All stainless steel SAE 304
- Recovery capacity of 45 gallons (171 liters)
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Includes a static dissipating suction hose assembly and connection hose assembly
IT-25 (4W) EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- All stainless steel SAE 304
- Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of neutralizing liquid
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Coalescing Filter Element (CFE) for moisture removal - optional
- Strainer Basket for mud recovery - optional
- Includes a Kanaflex Connection Hose, SD*
- Accessories available
IT-114L (4W) EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- All stainless steel SAE 304
- Recovery capacity of 2 gallon (7.5 liters) of dust into 9.8 gallons (37 liters) of neutralizing liquid
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Includes a static dissipating connection hose
Primary Cyclonic Seperators
PCS-114L EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof/dust ignition proof recovery unit
- Less than 10 Ohms of resistivity
- For general cleanup in hazardous locations
- Less than 8 ft³
- Optional Rupture Disc available
- For dry recovery only
- All stainless steel construction(except cart)
- Recovery tank capacity of 30 gallons (114 liters)
- Based on an Open-Front Drum Dolly for easy maneuverability
- Optional forklift capability
- Includes Connection Hose Assembly
PCS-60L (MBS) EX
Zertifikate
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof/dust ignition proof recovery unit
- Less than 10 Ohms of resistivity
- For general cleanup in hazardous locations
- Less than 8 ft³
- Optional Rupture Disc available
- For dry recovery only
- All stainless steel construction(except cart)
- Multi Bag Collection System
- Forklift capability
- Includes Connection Hose Assembly
Notes:
- HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
- ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
- Please be advised that all Tiger-Vac HEPA/ULPA Filters are Aerosol tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
- All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
