ATEX Category 3 Zone 2 (Gas) and Zone 22 (Dust) Static Dissipative / Grounded Vacuum Cleaner Systems. Designed for the remediation of asbestos, silica, lead and mold.
For the recovery of combustible/conductive dusts on a regular basis you need a vacuum cleaner/dust collector specifically designed for these applications (ATEX Category 1 or 2)
WARNING - Please take note of the following: Since a "cloud of dust" is not defined by ATEX, the National Fire Protection Agency (NFPA) warns that more than 0.8 mm of combustible dust laying on 5% of the floor of a room is considered a threat of explosion.
SELECTION CRITERIA FOR VACUUM CLEANERSHazardous areas
The following categories of equipment must be used in the Zones indicated:
| Category 1 vacuum cleaners | in Zone 0 or 20 |
| Category 1 or 2 vacuum cleaners | in Zone 1 or 21 |
| Category 1, 2 and/or 3 vacuum cleaners | in Zone 2 or 22 |
Category 3 Zone 22 :
Warning: Please read all instruction & user manuals before operating any ATEX Cat. 3 Vacuum Cleaner to ensure it is safe to use in your workplace.
Electric Series
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- For dry recovery only
- Includes disposable filter bags
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels
- Dustless Drill Kit available
*SD - Static Dissipative
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- For dry recovery only
- Includes disposable filter bags
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with a 2 + 2 cart
- Dustless Drill Kit available
*SD - Static Dissipative
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Equipped with a Middle Ring for poly liners
- For dry recovery only
- Includes poly liners and clip
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with a 2 + 2 cart
- Dustless Drill Kit available
*SD - Static Dissipative
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
*SD Static Dissipative
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D Ex tD A22 IP6X T100oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup of designated substances such as Asbestos, Lead, Silica, Mold, etc.
- Continuous Duty - Single or 3-phase (TEFC) motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS) with Teflon (PTFE) polyester media (H13)
- Main Cloth Filter and Dralon Pre-Filter are contained within a removable Filter Chamber
- For dry recovery only
- Carriage with suspended motor top (CSMT)
- Stainless steel SAE 430 body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Vertical mounting for areas with space constraints. Unit has a small environmental footprint
- Dustless Drill Kit available
SD* - Static Dissipative
TEFC - Totally Enclosed Fan Cooling
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup of designated substances such as Asbestos, Lead, Silica, Mold, etc.
- Continuous Duty - Singleor 3-phase (TEFC) motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- SD* Reverse Purge Cartridge and Skirt are contained within a removable Filter Chamber
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 16.3 ft² (15 100 cm²) for MRP models
- For dry recovery only
- Carriage with suspended motor top (CSMT)
- Stainless steel SAE 430 body and detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD*4-wheel cart and tool basket
- Vertical mounting for areas with space constraints. Unit has a small environmental footprint
- Dustless Drill Kit available
SD* - Static Dissipative
TEFC - Totally Enclosed Fan Cooling
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for general cleanup for the Food Industry
- Continuous duty single phase (TEFC) motor
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP)
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 16.3 ft² (15 100 cm²) for MRP models
- For dry recovery only
- Carriage with suspended motor top (CSMT)
- Stainless steel SAE 430 body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Vertical mounting for areas with space constraints. Unit has a small environmental footprint
- Equipped with an SD* 4-wheel cart for easy manoeuverability
SD* Static Dissipative
TEFC Totally Enclosed Fan Cooling
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Equipped with Manual Filter Shaker (MFS)
- Designed for general maintenance
- Continuous duty single and 3-phase motor/blowers available. 1-3 HP. 5 HP extended version available
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included. Other optional accessories according to your needs available
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ((U-O))
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Equipped with a Manual Reverse Purge with Filter Tubes (MRPFT)
- Designed for general maintenance
- Continuous duty single and 3-phase motor/blowers available. 1-3 HP. 5 HP extended version available
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included. Other optional accessories according to your needs available
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler included
- Manometer included
- Ideal for wet recovery. Unit is equipped with a wet floater system and liquid filter. A dry filter is also included for occasional dry bulk recovery
- Designed for general maintenance
- Continuous duty single and 3-phase motor/blowers available
- Camlock, Ø2" (Ø50mm)suction intake
- For wet and dry recovery
- All powder coated steel construction
- Recovery Tank with a capacity of 17 gallons (65 liters) wet and 15 gallons (57 liters) dry
- Accessories kit included. Other optional accessories according to your needs available
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Filter Shaker (MFS) system
- washable Main and Pre-Filters contained within a removable Filter Chamber
- Designed for the recovery of asbestos, lead, mold, etc.
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
Electrically Operated
Zertifikate
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Reverse Purge (MRP) system
- Reverse Purge Filter Cartridge contained within a removable Filter Chamber
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 19.1 ft² (17 700 cm²) for MRP models
- Designed for general cleanup
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
Electrically Operated
Zertifikate
II 3 D IP54 T160oC
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
- Ideal for the recovery bulky and lightweight scrap material
- Can be connected to process machines
- Continuous duty single and 3-phase motor
- Sight glass to monitor collection bag capacity
- For dry recovery only
- Powder coated steel construction. Stainless Steel AISI 304 available upon request
- Equipped with 4 wheels
Notes:
- Other models with more power and larger recovery capacities are available upon request. Electrically or Pneumatically (air) operated models available.
- In Zone 22, Category 2 and/or 3 vacuum cleaners can be used depending on the application required
- Please see selection criteria in Annex II of ATEX Directive 1999/92/CE.
- HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
- ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
- Please be advised that all Tiger-Vac HEPA/ULPA Filters are Aerosol tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
- All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
